COVER BOX SQ PVC 2G BLANK GRAY
2-gang square blank cover. Compatible with Carlon 2-gang FS boxes, non-metallic and metallic. Supplied with stainless steel mounting screws and gasket. Will not rust or corrode. Gray.

Manufactured from PVC thermoplastic molding compound and featuring gasketed lids attached with stainless steel screws. Offers corrosion resistance and physical properties needed for direct burial applications. Intended for indoor or outdoor use, to provide a degree of protection against contact with enclosed equipment, falling dirt, hose directed water, entry of water during prolonged submersion at a limited depth and external ice formation. UL listed with a NEMA 6P rating per section 314.29.

Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5 ft L x 1-5/16 in W x 7/16 in H.

Expanded capacity for extra outlets or outlet/switch combinations. 4-3/4 in x 4-7/8 x 1-3/8 in D.

For making a 90 deg inside turn around a corner from wall-to-wall or wall-to-ceiling.

Standard-grade. Meets all UL 498 requirements. Plugs blades are firmly embedded in body. 15 A, 125 V. 21/64 in cord diameter. Straight, NEMA 5-15.

Thermoplastic grounding connectors tough thermoplastic construction. Plug blades are firmly embedded in body.

Solid brass plug blades are firmly embedded in body. Resists chemical attack and is less brittle in extremely low temperatures. With terminal screw clamps. Combination Slot/Phillips head mounting and terminal screws for installation flexibility (Slot/Robertson screws in Canada where available). Terminal screws backed out, ready for wiring. Yellow color. Meets all UL 498 requirements.

CW WALLPLATE DECOR 4G #2164W WH

CW NIGHTLIGHT W/SWITCH

Grounding terminal screw standard. Combination switch with additional switch has 120/277 V rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.

Grounding terminal screw standard. Combination switch with additional switch has 120/277 V rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.

Grounding terminal screw standard. Combination switch with additional switch has 120/277 V rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.

CW WALL PLATE THERMOSET 8G IVY

Abuse-resistant thermoplastic construction. External cable clamp provides firm strain relief. Back wire terminal clamps for easy secure wiring. Triple combination head screws standard - Slot/Phillips/Robertson for use in the US and Canada. 1/4 to 11/16 in cord Dia.